• Order Before 3PM AEST For Same Day Dispatch
-OR-
  • iPhone 5 Screen Replacement Guide


    Replacing the screen of your iPhone 5 will save you time, money and privacy concerns with getting your phone repaired by someone else. Here we have outlined a guide to disassemble and replace the screen of your iPhone 5.

     

    Get the kit: iPhone 5 Screen Replacement Kit

     

    The replacement kit contains everything required to complete the install yourself.

     

    Before beginning your install, we advise that you should backup your iPhone in iTunes so you can restore the device once the screen repair has been completed. Secondly, as you remove parts from the device, make note of them and lay them in the order in which you remove them to make reassembly easy.

     

    Note: We are currently in the process of recording screen replacement tutorial videos and all associated imagery and video will be uploaded shortly! Stay tuned to our socials for updates!

     

    Removing the iPhone 5 Screen

    Step 1: Remove sim tray from your device, if you have lost your original sim removal tool, simply unfold a paper clip and insert it into the hole on the side of your device.

    Step 2: Remove the two pentalobe screws from the bottom of the device with the pentalobe screwdriver provided in the iPhone 5 Screen Replacement Kit.

    Step 3: Attach the suction cap near the bottom of the screen in an area which isn't inhibited by a fracture which will cause the suction cap to lose suction. Pull the suction cap up and get the edge of the plastic tool under the edge of the screen. Run the plastic pry tool along the entire edge of the screen apart from the top, as there are cables there. 

    Step 4: Lift the screen up and you'll see a metal cover at the top right held in with 3 screws, unscrew them and remove the metal cover. Lever up the 3 ribbons you just uncovered. The screen is now free.

     

    Removing components from the screen

    Step 1: To remove the earpiece from the screen, remove the two screws at the top of the screen. releasing the earpiece and a metal cover.

    Step 2: To remove the front camera and proximity sensor, apply heat from a hair dryer for approx 10-20 seconds to soften the adhesive and use the plastic pry tool to carefully lift this cable free by lifting the cable facing you upwards away from the screen.

    Step 3: To remove the home button and sensor, remove the 2 screws to the right and the left of the home button and apply some heat for roughly 10-20 seconds to loosen the adhesive.Carefully pull away the home button and sensor cable from the back of the screen.

    Step 4: To remove the metal cover from the back of your old screen, there are 6 screws holding it in place, one at the top and one at the bottom. on the back of the screen and two on either side.

    All done! Reverse the whole procedure for reassembly.

    Tutorial video & imagery coming soon! Stay tuned to our socials!

     

    Replacing the screen of your iPhone 5 will save you time, money and privacy concerns with getting your phone repaired by someone else. Here we have outlined a guide to disassemble and replace the screen of your iPhone 5.

     

    Get the kit: iPhone 5 Screen Replacement Kit

     

    The replacement kit contains everything required to complete the install yourself.

     

    Before beginning your install, we advise that you should backup your iPhone in iTunes so you can restore the device once the screen repair has been completed. Secondly, as you remove parts from the device, make note of them and lay them in the order in which you remove them to make reassembly easy.

     

    Note: We are currently in the process of recording screen replacement tutorial videos and all associated imagery and video will be uploaded shortly! Stay tuned to our socials for updates!

     

    Removing the iPhone 4S Screen

    Step 1: Remove sim tray from your device, if you have lost your original sim removal tool, simply unfold a paper clip and insert it into the hole on the side of your device.

    Step 2: Remove the two pentalobe screws from the bottom of the device with the pentalobe screwdriver provided in the iPhone 5 Screen Replacement Kit.

    Step 3: Attach the suction cap near the bottom of the screen in an area which isn't inhibited by a fracture which will cause the suction cap to lose suction. Pull the suction cap up and get the edge of the plastic tool under the edge of the screen. Run the plastic pry tool along the entire edge of the screen apart from the top, as there are cables there.

    Step 4: Lift the screen up and you'll see a metal cover at the top right held in with 3 screws, unscrew them and remove the metal cover. Lever up the 3 ribbons you just uncovered. The screen is now free.

     

    Removing components from the screen

    Step 1: To remove the earpiece from the screen, remove the two screws at the top of the screen. releasing the earpiece and a metal cover.

    Step 2: To remove the front camera and proximity sensor, apply heat from a hair dryer for approx 10-20 seconds to soften the adhesive and use the plastic pry tool to carefully lift this cable free by lifting the cable facing you upwards away from the screen.

    Step 3: To remove the home button and sensor, remove the 2 screws to the right and the left of the home button and apply some heat for roughly 10-20 seconds to loosen the adhesive.Carefully pull away the home button and sensor cable from the back of the screen.

    Step 4: To remove the metal cover from the back of your old screen, there are 6 screws holding it in place, one at the top and one at the bottom. on the back of the screen and two on either side.

    All done! Reverse the whole procedure for reassembly.

    Tutorial video & imagery coming soon! Stay tuned to our socials!

     

    Write Your Comment

    Only registered users can write comments. Please, log in or register